Slip rings are commonly used to transfer electrical signals and power to a rotating shaft. The Orbex 300 series is ideally suited to applications where signals and power need to be transmitted in a compact space. By using a small rotor diameter, surface speeds are minimized. This allows for minimal imbalance which translates into long life. The use of gold on gold contacts assures long life, low noise, minimal interference between circuits, and low contact resistance. Slip rings can be ordered with low current signal circuits, high current power circuits, or a mix of the two. Configurations start at 2 circuits and extend through 56 circuits in the standard 300 series offering.
-
Miniature Slip Rings, Slip Rings
312M1-0600 Miniature Slip Rings
6 circuits rated 2A each, 12.4mmOD, ABS housing, “M1” flange, L = 14mm, IP51 and IP65 options
-
Miniature Slip Rings, Slip Rings
312M2-0600 Miniature Slip Rings
6 circuits rated 2A each, 12.4mmOD, ABS housing, “M2” flange, L = 14mm, IP51 and IP65 options
-
Miniature Slip Rings, Slip Rings
312M3-0600 Miniature Slip Rings
6 circuits rated 2A each, 12.4mmOD, ABS housing, “M3” flange, L = 14mm, IP51 and IP65 options
-
Miniature Slip Rings, Slip Rings
325M1-1503B Miniature Slip Rings
15 circuits rated 2A each and 3 circuits rated 10A or 15A each, 25mmOD, Aluminum housing, “M1 Flange”, L = 51.7mm, IP51 and IP65 options
-
Miniature Slip Rings, Slip Rings
325M1-4404A Miniature Slip Rings
44 circuits rated 2A each and 4 circuits rated 6A each, 25mmOD, Aluminum housing, “M1” flange, L = 85.5mm, IP51 and IP65 options
-
Miniature Slip Rings, Slip Rings
325M1-4600 Miniature Slip Rings
46 circuits rated 2A each, 25mmOD, Aluminum housing, “M1” flange, L = 72.5mm, IP51 and IP65 options